Lesson 1 of 10 · Reach owners
Email infrastructure: domains, inboxes and warm-up
6 min read · Updated Nov 16, 2026
The short answer
Outreach email is sent from dedicated sending domains and inboxes, kept apart from your firm's main domain, with authentication records in place and a warm-up period before any owner is contacted. In Equitle you pick the domain names, and Equitle registers them, sets the records, creates the inboxes, warms them and keeps each one inside a daily limit.
By the end of this lesson you will be able to:
- Explain why outreach uses dedicated sending domains instead of your main domain
- Describe SPF, DKIM and DMARC in one line each, and what warm-up does
- Identify what Equitle sets up for you and what you still decide
From a domain name to an inbox that is ready to send
- 1Pick namesClose to the domain you already use Your part
- 2RegisterEquitle registers each sending domain
- 3AuthenticateSPF, DKIM and DMARC set
- 4Create inboxesFrom your name and profile photo
- 5Warm upVolume grows, days left shown
- 6ReadySends inside its daily cap
Key takeaways
- Outreach goes out from separate sending domains, so your firm's main domain and day-to-day email are not part of it.
- SPF lists who may send for a domain, DKIM signs each message, and DMARC tells receivers what to do when those checks fail.
- A new inbox has no sending history, so it is warmed up gradually before it sends to owners.
- In Equitle you choose the domain names. Registration, records, inboxes, warm-up and daily caps are handled for you.
- Warm-up runs on Equitle's side around the clock. Outreach itself goes out inside your send window.
Why outreach uses its own domains
Inbox providers such as Gmail and Outlook decide where a message lands partly from the history of the domain that sent it. That history is called reputation. Email to owners who have never heard from you is the riskiest mail a firm sends: some addresses bounce, and some recipients mark the message as spam. If that mail goes out from your main domain, the damage lands on the same domain your partners, lenders and portfolio companies hear from.
The standard answer is a dedicated sending domain: a separate domain, close in name to your own, used only for outreach. Each one carries a few inboxes, and each inbox sends a modest number of emails a day. If one inbox has a bad week, the others keep working and your main domain is not involved. The wider background is in Email deliverability.
SPF, DKIM and DMARC in one line each
Receivers also check that a message really comes from the domain it claims. Three public records do that job. They are published in the domain's DNS, the internet's directory of domain settings.
| Record | What it does | Standard |
|---|---|---|
| SPF | Lists the servers allowed to send mail for the domain | RFC 7208 (2014) |
| DKIM | Signs each message, so the receiver can confirm the domain stands behind it | RFC 6376 (2011) |
| DMARC | Tells receivers what to do with mail that fails SPF and DKIM, and where to send reports | RFC 7489 (2015) |
Google's Email sender guidelines, in effect since February 2024, require SPF or DKIM from every sender to Gmail accounts, and SPF, DKIM and DMARC from anyone sending more than 5,000 messages a day. Yahoo's sender requirements, enforced from February 2024, draw the same line: SPF or DKIM at a minimum, and both plus a DMARC policy for bulk senders.
What warm-up is
A new inbox has no history at all. If it sends a full day of outreach on its first day, receivers see a stranger sending in volume, which is how spam looks. Warm-up fixes that by starting small and growing: a low volume of mail at first and a little more each day, until the inbox has a record of delivered mail behind it. Google's guidelines give the same advice: start with a low sending volume and slowly increase it over time.
Two limits stay in place after warm-up. A daily cap is the most emails one inbox sends in a day. Send pace is the gap between one email and the next from the same inbox, so mail does not leave in a burst.
How Equitle prepares your domains and inboxes
In Equitle this lives on the Inbox Management page in Settings. You add domains and inboxes in a short wizard, and Equitle does the setup.
- You pick the domain names. The wizard starts from names close to the domain you already email from. Domains and inboxes have their own cost, shown before you pay.
- Equitle registers each domain and sets its SPF, DKIM and DMARC records. The Domains table shows the status of all three.
- Equitle creates the inboxes. It can build every mailbox from your own name and profile photo, or you can name each one yourself.
- Warm-up starts on its own. Each inbox shows Warming with the days left. Warm-up takes about two weeks.
- The inbox joins the rotation. Its daily cap rises as it finishes warming, and campaigns spread their sends across the inboxes that are ready.
While an inbox is warming it sits out of campaigns, and it joins on its own when warm-up ends. A first campaign will not launch until an inbox is ready, so no owner hears from a cold inbox.
What you do not have to do
- Go to a registrar to buy domains, or log in anywhere to edit DNS records.
- Create mailboxes one at a time and add a name and photo to each.
- Run a separate warm-up tool or remember when an inbox is ready.
- Track limits in a spreadsheet. Each inbox has its own daily cap.
- Check for trouble every morning. That is the subject of Inbox health and where emails land.
Using inboxes you already have
You can also connect a Gmail or Outlook inbox you already use. Equitle sends from it with the same rotation, limits and reply handling, and shows a health report with the setup checks for its domain. For a connected inbox, warm-up starts when you choose it.
Try it in Equitle
You choose the domain names and Equitle does the rest: it registers the domains, sets SPF, DKIM and DMARC, creates the inboxes, warms them and holds each one to a daily cap. You do not edit DNS, run a warm-up tool or track limits by hand. Warm-up and monitoring run on Equitle's side around the clock, so the inboxes are ready when your campaign is.
Key terms
Sources
- Google (2026). Email sender guidelines, Gmail Help (requirements in effect from February 1, 2024; read November 2026): authentication required of all senders and of senders of more than 5,000 messages a day, the spam rate thresholds, and the advice to raise sending volume slowly. View source
- Yahoo (2026). Sender Best Practices, Yahoo Sender Hub (standards enforced from February 2024; read November 2026): SPF or DKIM for all senders, both plus a DMARC policy for bulk senders, and the spam rate limit. View source
- Internet Engineering Task Force (2014). RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, April 2014: what SPF is for. View source
- Internet Engineering Task Force (2011). RFC 6376, DomainKeys Identified Mail (DKIM) Signatures, September 2011: what a DKIM signature claims about a message. View source
- Internet Engineering Task Force (2015). RFC 7489, Domain-based Message Authentication, Reporting, and Conformance (DMARC), March 2015: what a DMARC policy tells receivers. View source
- Equitle (2026). Product overview: what Equitle does, who it is for and how a free trial starts. View source
- Equitle (2026). Pricing and the credit guide: what each action costs in credits, and what uses none. View source
Common questions
Why not send cold email from my main domain?
Cold outreach produces more bounces and spam complaints than ordinary mail, and those count against the domain that sent it. A dedicated sending domain keeps that risk away from the domain your firm uses for everything else.
What is the difference between SPF, DKIM and DMARC?
SPF lists who may send for a domain. DKIM signs each message so the receiver can confirm the domain stands behind it. DMARC tells receivers what to do when a message fails those checks and where to send reports.
How long does email warm-up take?
In Equitle a new inbox warms for about two weeks, and its row shows the days left. The daily cap rises as warm-up finishes.
Do I have to set up DNS records myself in Equitle?
No. For domains you add through Equitle, the SPF, DKIM and DMARC records are set for you, and their status is shown in the Domains table.
